From left to right: Stock Gear, Pro-Shifted Gear, Face Plated Gear

 

Liberty's High Performance Products, Inc.
6390 Pelham Road
Taylor, Michigan 48180
USA
  PHONE
313-278-4040
  FAX
313-381-2411
  EMAIL
libertysgears@aol.com

 

 

HomeClutchlessFWD/HondaMetal EnhancementLSC5000P/S BikeTTC TransmissionsPro-ShiftFace PlateServicesContact Us 

 

 

 

 

 

 

Pro shifting and face plating eliminate the need to worry about missed shifts.  This is made possible by

removing the stock synchronizers and opening up the engagement window for faster, higher rpm shifting.

 

Initially, the cost of face plating is slightly more than pro shifting, but in the long run you will

find that face plating is more cost effective due to less wear on engagement components.

 

With pro shifting, the shift lugs engage on the inside of the slider and as the pro rings wear from normal

use, they burr up and require dressing, deburring and/or replacement to maintain smooth shifting. 

 

With face plating, the engagement lugs are on the face of the slider which will not allow them to burr

up and require maintenance.  The design of the face plate shift lugs give them much more contact area

which makes them much more durable, so longevity is increased dramatically (about three to four

times longer than a pro ring) and there is virtually no chance of them popping out of gear.

 

Pro shifting and face plating does NOT make your transmission clutchless.  The

shock load of shifting without the clutch will cause severe damage to your transmission

 

Parts or complete transmissions can be sent in for face plate or pro shift modification.